Another info about fixing router

Go ahead and key the first number into your web browser and see if you get a request to log in. If not, try the second number and see it that does it. Some routers will also bring you to their log in screen if you key in routerlogin.net.

pen any web browser, such as Internet Explorer or Mozilla Firefox. In the address bar, enter “192.168.0.1″ (without the quotes) and press the enter key. This will bring up the login prompt for most Netgear wireless routers. If that doesn’t work, try “www.routerlogin.net”, “192.168.0.5″, or “10.1.10.1″ until the login window appears.

pen any web browser, such as Internet Explorer or Mozilla Firefox. In the address bar, enter “192.168.0.1″ (without the quotes) and press the enter key. This will bring up the login prompt for most Netgear wireless routers. If that doesn’t work, try “www.routerlogin.net”, “192.168.0.5″, or “10.1.10.1″ until the login window appears.

When you try to access your routerlogin Netgear page, it just displays search engine results or you are getting a “Page can not be displayed” or a “Can not be found” error.

When you try to access your routerlogin Netgear page, it just displays search engine results or you are getting a “Page can not be displayed” or a “Can not be found” error.
There are a number of issues that can cause this to happen. I am going to…

Once you have your router plugged in and connected to your network, NOTE* You must bridge your modem and connect from your modem to the WAN port of the router and connect a cat5e cable from a LAN port to your PC, open any browser and type “www.routerlogin.net” the default user name and password is admin / admin or admin / password. These should be changed to something different.

1. pen any web browser, such as Internet Explorer or Mozilla Firefox. In the address bar, enter “192.168.0.1″ (without the quotes) and press the enter key. This will bring up the login prompt for most Netgear wireless routers. If that doesn’t work, try “www.routerlogin.net”, “192.168.0.5″, or “10.1.10.1″ until the login window appears.

1. pen any web browser, such as Internet Explorer or Mozilla Firefox. In the address bar, enter “192.168.0.1″ (without the quotes) and press the enter key. This will bring up the login prompt for most Netgear wireless routers. If that doesn’t work, try “www.routerlogin.net”, “192.168.0.5″, or “10.1.10.1″ until the login window appears.

Power off your computer as well as the internet modem and disconnect their power cords from the electricity outlet.
Find the Ethernet cable that connects your computer to the modem and unplug its end from the computer.
Plug the taken out end into the Ethernet port at the back of your router.
Plug one end of the Ethernet wire (which came with the router) into the ‘LAN 1’ port at the back of your router. Now plug the second end into the Ethernet port at the back of your computer. It is the same port from which you initially ran an Ethernet cable to the internet modem.
Connect the power cord back to the modem and power it on. Wait for 2 or 3 minutes for the modem to turn on fully.
Connect the router’s power cord to the outlet and power it on. Again, wait for 2-3 minutes for it to turn on fully and detect the modem.
Plug the power cord back to your computer and to an outlet and power it on. Make sure that you have all the lights lit on your router. If any light is not lit and re-check the entire connection following the abovementioned procedure.
Now that all the lights are lit on your router and modem, and the computer is fully rebooted, open your web browser viz. Internet Explorer or Firefox etc.
Type ‘ http://www.routerlogin.net ‘ or ‘192.168.0.1’ in the address bar of your browser and hit ‘Enter’ on the keyboard.
This will bring up the router login window, key in the username and password that came with the router documents. By default, ‘admin’ is the username and ‘password’ is the password respectively. However, refer to your router docs. before entering anything. If you changed your username and password in the previous setup then enter those otherwise the router will not let you login.
Click on the ‘Login’ button or ‘OK’ or hit ‘Enter’ on the keyboard
This will take you to the Netgear wireless router configuration window; make whatever changes you want to on this screen. When finished exit the window.