Launched on December 6 of last year, Google’s WiFi mesh network seems to be performing well.
According to an article, the network scored an average download speed of 117.6 Mbps (Megabytes per second) out of 150 Mbps.
The article further stated that it averaged an upload speed of 108.5 Mbps out of 150 Mbps.
Especially given its price ($130 for the base unit; $299 for a 3-pack), it gives solid coverage.
However, that’s not all…
Read on to find out just how functional this WiFi mesh network is.
But First, How Does Your Typical WiFi Mesh Network Work?
A mesh network is unlike your standard hotspot network. Instead, it depends on mesh nodes. These nodes transmit signals to hundreds of other nodes, making it easier to get a solid connection over a vast amount of space.
What makes a mesh network impressive is that it only needs one node to be physically connected to a modem. Unlike your traditional network, which needs to be entirely connected.
This feature makes the mesh network as wireless as can be.
However, it still works like a typical wireless router. The nodes use the same communication channels as your standard WiFi: 802.11a, b, and g.
Because you only need one node connected to your modem, the installation costs are a lot less. Plus, there’s less hassle in physically getting it set up.
And, if you do decide you don’t want it anymore, it’s just as easy to uninstall.
What Makes Google WiFi Accessible?
According to this article, the network has very powerful radios. There was little challenge in getting a strong connection.
But, other than the strong signal, here’s what other features it comes with.
Aesthetically pleasing shape
Google WiFi looks like a small jar. Which, if you’ve seen other WiFi networks, is more visually pleasing.
Because of its appearance, you can place it on your nightstand or desk. Not in some corner or underneath the TV.
While it would look fine on a table or desk, it might look awkward where your standard modem or other (blocky) WiFi would be at.
We mentioned earlier how you simply need one node installed in order for a mesh network to work. Google WiFi is no exception.
But it also comes with an app that tests the placement of each node. That way, you can find the optimal placement for the best connection.
Yes, you can control your WiFi. But that’s not all…
You also can control the brightness of the LEDs.
Plus, you can pause the Internet delivery on devices such as mobile phones.
On top of that, you can access technology-friendly home products.
Back to strong signal
You should expect a strong signal. According to an article, a 3-pack will cover a 4,500 square foot home.
In addition, the reason why mesh networks work so well is because they intuitively find the fastest route—aka dynamic routing.
This means you should be able to get a fast connection in one corner of the house versus the opposite side.
For more information, contact us.
It’s easy for Photoshop to look a little daunting when you first open the program.
There are so many tools to use that it’s understandable to feel a little overwhelmed.
Yet, once you spend a little time on Photoshop, you’ll soon learn how to use its many features. The more you practice, the more you will learn.
Take a look at the Photoshop online tricks and tools that will turn you into a pro.
Customize Your Work Space Using Photoshop Online
It’s easy to arrange Photoshop online to customize your work space.
Optimize the platform to arrange the apps windows to complement different tasks.
You can select:
It will also arrange the tools to match the ones you are most likely to need.
Access the work space and go to Windows > Workspace and then select the one you want.
You can customize a new workspace by going to Windows > Workspace > New Workspace.
Customizing the workspace will add organization into the platform so you can work like a pro.
Bring in image to life by using the many brushes Photoshop online has to offer.
It can add texture to an image that will make it stand out on paper or a webpage.
Some great brushes to use include:
You can gain access to the brushes by clicking F5 or by selecting the brush icon in the Tool menu.
Mixed Media Brushes
There are many advantages of using Photoshop – and one of the best is its mixed media brushes.
Mixed media brushes allow you to switch from paint brushes to pens and pencils in an instant.
There are easy-to-download brush sets that offer different artistic styles. This will allow you to create professional designs on your computer.
The only thing that may stand in your way of a professional design might be a wireless network.
Paint Brush Strokes
Paint like a pro on Adobe Photoshop online by using paint brush strokes.
These handy tools can simulate real painting tools that will add some artistic flair to an image.
You can choose from sponges, finger painting and bristle brushes.
It’s a great way to create realistic images that appear as if they’ve been created by hand.
You can use various color types to create professional designs. You can choose colors such as RGB, Pantone and CMYK.
It’s simple to set foreground and background colors. What’s more, you can create swatches of your commonly-used colors for your projects.
All you need to do to access the color picker is click on the foreground swatch on the Tool Menu. You could also click F6 on your computer keyboard.
Once you have selected the color picker, select a color by:
Entering the numerical values for each color, such as TGB, Lab, HSB or CYMK.
Clicking on the left-hand side of the window to move the sliders to change colors in the spectrum.
Take an image to the next level by adding some visual effects.
Some of the most popular effects that can transform your work include:
You can discover the many Photoshop effects in the Filter menu.
Of course, to access Photoshop online, you will need an excellent internet connection. Click here for top tips on how to improve your WiFi performance.
When most of us sign up for home internet services, we expect our WiFi connection to reach the whole house. And with the average internet speed in the U.S. now 1000x faster than good ol’ dial-up, there’s no reason not to take advantage of it.
At the same time, you must reconcile with the fact that the strength of your connection wanes the further you are from the router.
So how do you manage to set up your box to make sure you’re connected in your home office or in the shower? (Hey, we live in a connected world!)
Here are a few tips to do just that:
Place it Centrally
Your router doesn’t need to be on top of your computer for your to have a good wifi connection.
In fact, it’s better to place the router in a central location in your house to better reach every corner – not just your office or kitchen table.
Finding the best central location for your router is an experiment. Don’t settle for the first place you try (unless your download speeds are through the roof).
Instead, experiment with several potential locations in your home and measure the speed in different areas to make your decision.
If you find your WiFiconnection peaks when the router is half way up a wall, opposite a bookcase, then so be it. It’s worth it for those sweet, sweet download speeds.
Avoid Thick Walls
The radio waves produced by your router can move through walls like ghosts. But unlike a specter, they struggle with concrete or brick walls.
Thick walls tend to absorb radio waves and kill your WiFi connection. So be wary of the placement of those walls in your home when you’re placing your router.
Other things that kill your download speed? Water, metal, and mirrors.
Water absorbs your those waves like a thick wall will. Meanwhile, metal and mirrors reflect them back rather than propelling them forward.
So, if you have a carefully crafted mirror maze in your house, avoid putting your router in that room. Your signal will bounce around, but it may not escape!
Keep Out of the Kitchen
Your kitchen is full of appliances that emit radio waves.
In fact, your microwave and your router use the same 2.4 GHz frequency of the electromagnetic spectrum.
So while it sounds like a conspiracy theory, your microwave does throw off your WiFi connection.
But in reality, so does your baby monitor, your cell phone, and your garage door opener.
Keeping your router out of the kitchen is a good idea because it avoids microwave interference. Plus, other metal appliances also get in the way by absorbing your precious radio waves.
Install your router at least three feet from other appliances – including your phone – for the best connection.
If you go take the time to avoid obstacles that suck up your internet speed, it’s possible to maximize the revolutionary speeds your service provider offers.
The Bottom Line on Your WiFi Connection
Still having trouble managing your connection in the furthest reaches of your home? Consider looking into a WiFi extender and click here to find for our full guide on setting it up.
We’ve all lost our WiFi passwords at some point in time.
And in that very moment, we all wished we would’ve written them down.
So, what if you didn’t write it down or memorize it? How can you get your WiFi password back?
Well, all is not lost yet. There’s a litany of ways you can get your password back.
Here are a few ways of how you can get your WiFi password back.
Look At The Back Of The Router
Most routers have the network key and password already labeled on them.
If you pick-up your router, you might notice a sticker on its back or bottom side. This sticker will have a few strings of numbers and letters on it.
And one of those long labels will be your router’s default password. If you haven’t reset your default password yet, this is your most current password. And will be able to get you back online.
However, if you’ve changed it recently, it might not work.
Your Window’s PC Already Has Your WiFi Password saved
Given that about 90% of the computer market is on a Windows operating system, you’re in luck.
If you’ve connected to a WiFi network over a device running a Windows operating system, your PC has remembered that password. What a relief!
If you’ve forgotten your WiFi password on your PC, locate the “Network and Sharing Center.” This is in the menu for the “Control Panel.”
Once you’re there, click on the network you’ve previously connected to. Scroll a bit down, and you’ll see “Show Password.”
You’ve got your WiFi password again!
Even Your Mac Already Has Your WiFi Password Saved
If you’re in the minority running a Macintosh operating system, don’t worry.
You’re password’s still there.
Locating your WiFi password couldn’t be any easier on an Apple device:
Simply press the “Command” and “Spacebar” keys simultaneously to open “Spotlight.” From there, type “Keychain Access” into the search bar. Then press “Return.”
From there, locate the network you’re trying to get the password too. In order for this to work, you must have already joined that network before. And have used the correct password, as well.
Afterward, you’ll be presented with a window to fill out.
You’ll have to enter your administrator login information again. This will be the same username and password you use to log into your Macbook.
Then, you’ll be rewarded for all your strenuous work:
Your network’s WiFi password will be on display.
Reset Your Router And WiFi Password
If all else fails, start from mile-zero.
Should you not be able to get your WiFi password back after following the above tips, there’s only one option left:
Resetting your internet router.
Most routers will have a pinhole sized opening toward their backside. When inserting the end of a paperclip into it, hold it there fourteen seconds. This will make sure you’re fully resetting the router.
After doing that, you’ll have to reinstall your router. This may mean you’ll have to look for your router’s instructions to install it again.
A fresh install will allow you to reset your password, even though it may be some work.
Have any more questions for us on how you can get back your WiFi password? Feel free to get in contact with us!
Are you trying to set up a wireless internet network in your home? Looking to learn more about wireless networking? In need of a WiFi 101?
These days, most people use wireless networking on a daily basis. Yet, few of us really know how it works.
Wireless networking can seem complicated. You can probably testify to how confusing wireless connection is if you’ve ever tried to set it up at home.
Setting up a wireless connection isn’t complicated once you understand how it works!
This article will serve as your go-to WiFi guide. We’re going to bring you up to speed with everything there is to know about basic wireless networking!
Understand Wired Networking
For there to be any sort of internet connection, you need a router. A router is the main device for any wired or wireless connection.
Usually, you’ll find around 4 ports on one end of a router. These are your LAN (Local Area Network) ports. LAN ports provide the network that internet users need to connect to.
The number of LAN ports is the number of networks that are possible with a single router. If you want to add more networks to a router, you’ll need to add more network cables and ports to the router.
For any wireless or wired router to connect to the internet, there needs to be a WAN (Wide Area Network) port. Routers usually come with 1 WAN port. The WAN port connects multiple LAN ports together.
Routers feature hubs or switches. These allow for multiple users to connect their devices to a network.
If you’re using a wired network, you’ll plug a network cable, like an ethernet cord, into one of these LAN ports. These network cables then connect to your electronic device.
WiFi 101 #1: How Wireless Networking Works
With wireless networks, they mean exactly what they say.
WiFi 101 Rule #1: No wires. No cables.
But wired networks tend to be faster than wireless networks. That’s because wireless connections compete less with other connections in the air.
Wired networks connect to a single router and don’t compete with other networks in the area. But wired networks mean less flexibility to take your devices where you want.
A WLAN (wireless local area network) is another word for a wireless network. A wireless network uses the same features as a wired network.
For a router to provide wireless connection, it needs an antenna. Antennas are usually built right into the router or on the outside of it.
Rather than connect with network cables, wireless networks communicate with wireless radio connections. Devices that can receive wireless radio connections can connect to a wireless network.
For there to be WiFi, there needs to be an access point. An access point (AP) transmits a WiFi signal and allows you to connect to it.
Wireless routers come with multiple LAN ports, a WAN port, and an access point. Every wireless network belongs to its own access point.
WiFi 101 #2: What to Expect When Setting Up
When you set up your wireless network, you’ll need to name it. This name is your wireless network’s Service Set Identifier or SSID.
An SSID distinguishes a wireless network from other networks. This is what you see when you try to connect to WiFi.
You’ll need to access your router’s configuration page in your web browser when setting up. You’ll configure your router by entering its address bar on the configuration page. You’ll find your router’s IP in the instruction manual.
Have you ever had to enter a password to connect to a wireless network?
That’s because people privatize their wireless networks, and so should you!
Your router supports different modes of authentication to support your WiFi. Some are less secure than others. In your home network, you want to use a WPA2 authentication.
WPA2 is an updated security protocol that will secure your wireless network.
To speed up your wireless connection, you can set up a password with an authentication scheme. This prevents neighbors and others in the area from using your internet.
Most modern routers are dual band. This means that they support WiFi in 2.4 or 5 GHz. 5 GHz is faster, but some devices won’t be able to connect as easily.
Connect Better With Wireless Networking!
Wired networking and wireless networking both have their advantages and disadvantages.
Wired networks provide faster internet speed. But nothing beats being able to take your home internet connection with you anywhere!
You can connect to the internet in your bathroom, kitchen, or backyard on a wireless network! Create a faster and more efficient experience using the most up-to-date wireless router!
WiFi can be tricky to get right. One minute it’s working beautifully, the next minute, you’re stuck with a spinning cursor as pages refuse to load. There’s got to be an easier way to boost your WiFi performance rather than calling your ISP every time it goes out.
If you’re looking to speed up your Internet connection without constantly turning your router off and on again, we’ve got 5 quick and easy tips for you to try.
Our first tip to increase your WiFi performance may be a little obvious. Of course, you’ll speed up your connection – that’s why you’re reading this, right?
However, the speed of your WiFi connection is determined by what version you have. That’s right: WiFi goes through updates and upgrades just like your favorite hardware and software.
Each version of WiFi has a number which indicates what version it is. Usually, the newer versions are faster than the old ones.
The former standard version was 802.11n. Times have changed, and we’re working with 802.11ac as the standard. Make sure that your WiFi is up to date, and you’ll see an automatic increase up to 3 times your previous speed.
Though you may have a place in your house perfect for your router, that doesn’t mean it’s perfect for your connection. Your router needs to be placed in an area that’s optimal for a WiFi connection.
That means it can’t be near water, nor is it a good idea to surround them with metal, glass, brick, or insulation. Human bodies aren’t the best either, but at home, there’s not much you can do about it.
However, the rest of these materials can limit the strength of your signal, so put your router in an open place – and elevate it off the floor as much as you can.
If you’ve got images in your head of someone fiddling with the long antennas of an old, staticky TV, you’re not too far off!
Wireless routers come with antennas (obviously), though the type you have will depend on your router. The antennas can be external and internal.
If your antennas are external, take a shot at positioning them perpendicular to each other. That means one needs to be vertical while the other’s horizontal.
Why does this work? The connection between your router and device will be stronger when the transmitter and receiver operate on the same plane. This positioning will fix that.
If you have internal antennas or only one, try fiddling with it until you find a position which works.
To up your WiFi connection, make sure your network is secured.
If it isn’t, there’s no telling who’s leeching off your network. Neighbors, friends, the creepy old guy in the parking lot – it could be anyone.
Not only can this drag down your speed by sapping your bandwidth, it can also be a threat to your entire system.
This may sound a little advanced, but there’s really not much to it. You can easily use a heat mapping software to see if there’s possibly another WiFi connection that’s interfering with yours.
The software works by showing you what your home’s wireless map looks like, so if nothing else, you can see precisely what kind of connection each room is getting.
Ready to Boost Your WiFi Performance?
Figuring out your connection doesn’t have to be a headache, nor do you have to be a tech expert in order to experience the best connection your router is capable of.
If your WiFi is acting up and your ISP doesn’t seem to be helping, try one of these tips. Nothing wrong with ensuring your connection’s secure, right?
If you have questions regarding your WiFi connection, or you’re having trouble with your router, we’d love to help out!
Is time to change internet providers?
Do you want to keep your current router but want to make sure it is compatible?
What does a router do?
Think about a modem, it connects you to the internet. A router then distributes it to your different devices.
They are relatively easy to set up if you have a knack for technology.
Many internet providers offer a combined modem and router.
The benefit of this is they do all the work, and if there is a problem they can easily troubleshoot it for you.
Why would you want to use your own router?
- Yours may be broken and you need a new one
- When signing up to a new plan it might cost extra, or be a rental scheme
- The provided router may be an old model and you want faster speeds
- You might have limited access to the dashboard and can’t make modifications
While there are a large number of internet providers to choose from, four of the most popular include:
- Cox Communications
- Time Warner Cable
All four of these internet providers will allow you to use your own router device.
Verizon recommends the Fios Quantum Gateway for their service.
It is fast, secure and suitable for large homes. If you have this router they will offer you technical support and a two-year warranty.
If you do want to provide your own router, this option is available with step by step tutorials.
You may have to use your Verizon technology to work as a bridge between their technology and yours.
Some technical knowledge will be required to make the switch to your preferred device.
Cox Communications have their own preferred all-in-one devices which can either be included or on a monthly rental plan.
If you would like to supply your own, there are a few things you need to consider and it is worth reading their list of preferred options before purchasing a new dual modem or router.
They recommend DOCSIS 3.0 or DOCSIS 3.1 to ensure you can get the high speeds you are looking for.
Time Warner Cable
Time Warner Cable suggest you lease a device as part of your service. This option will get you technical support, free upgrades and security settings included.
You can supply your own, but it is suggested you do your research and understand which type of internet plan you are on.
All the plans have different download speeds so you need something fast enough to handle your usage.
Your device will need to support IPv6 and it should be noted DOCSIS 1.0/1.X will not work with their services.
AT&T recommend you use one of their chosen routers, which are straightforward to set up.
If you want to use your own, once again you will need to use the DSL modem as a bridge which requires some basic configuration.
You will need to be able to login to your router and make any required changes.
If you are using U-Verse it gets a bit trickier as you really do need to use their technology. In this case, it is probably best to stick with what you have been supplied.
Even if you aren’t currently on a high-speed plan, if you are going to buy a new router it is worth buying a faster one than you currently need.
Most of the companies are flexible but it is important to read through the technical specifications to make sure your router matches up to your intended use.
Do you use your own router with any of these companies? Or do you prefer a 2-in-1 device?
We would love to hear your feedback in the comments section below.
Over the last few years, the Internet has evolved to make our lives easier.
We can chat with friends or manage our finances, all with a simple point and click.
But as the Internet has evolved, so to have the practices of hackers looking to exploit your personal information.
To keep yourself safe online, you have to check your NetGear router regularly.
In this article, we’re going to show you why and give you tips on how to repair your device if something’s amiss.
Fix Password Bypass Vulnerability
Recently, third-party researchers have discovered a way for hackers to obtain the admin password for a NetGear router.
It comes from a flaw in the password recovery process.
Hackers gain the login credentials as well as control over the whole device.
With this control, they can change the router’s configuration or upload new firmware.
Worse still is that these attacks can be made remotely if the router’s remote management option is enabled.
Thankfully, however, this function is automatically disabled on every NetGear router, though you can change that by going to advanced settings.
To test for this vulnerability, you can run a Python code developed by Trustwave researcher, Simon Kenin.
You’ll have to disable password recovery to ensure a reliable test.
If you find a flaw in your NetGear router, don’t panic.
The manufacturer has updated the firmware to patch affected networks.
Simply download the update, and you’re ready to go.
Eradicate IoT Botnets
Not long ago, the Mirai Botnet disabled the Internet in Germany for a few hours due to distributed denial-of-service (DDOS) attacks against Internet Service Provider Deutsche Telekom.
Hackers leveraged infected routers with malware and most of the time users were unaware of the security breach.
Taking down the Internet isn’t the only havoc botnets can wreak.
Back in 2007, the infamous Gameover ZeuS botnet targeted Microsoft operating systems.
Hackers stole almost $70 million and didn’t stop until 2010.
By then the FBI got involved and arrested over a hundred people.
That’s the trickiest thing about botnets: often they remain dormant until the C&C server issues them commands and by then it’s too late.
Recently, researchers discovered similar weaknesses that can affect your router.
While no patch exists yet to combat this threat, a few open source options are available online.
Programs like Snort offer free network detection to find botnets, quarantine them, and eradicate them from your device.
Getting the Most Out of Your NetGear Router
As we move closer and closer to a more online world, cyber security is critical to our safety.
Your router can connect you to the Internet, but you have to make sure unwanted guests stay off your network.
Check it regularly to ensure your system hasn’t been infected.
You can also use a WPS setup to reduce the number of entry points cyber criminals have access to.
Got more questions?
Have a few tech tips to divulge?
Join the conversation in the comments below.
You can also contact us with any queries.
We’re always here to help.
The benefits of wireless internet are infinite – when it’s up and running, that is. People depend on a wireless network that’s fast, reliable and has wide coverage. Dial-up internet is a thing of the past and if your WiFi connects that slow then you have a problem.
Lucky for you, there are plenty of free and simple tricks to maintain a strong wireless network.
Please Note: You should already have a wireless router setup as well as your computer connected to a wireless network. Contact your Internet provider if you do not know your wireless name/ID or password.
1. Move Your Wireless Router
Physically moving your router is one of the easiest ways to improve your wireless network connection. Your router should be in a centralized location of your home. Try in-between the levels of your home, such as the first floor.
Keep your router away from any other devices that may interfere with a wireless signal. That includes microwaves, cordless phones, or iHomes.
Avoid having your router in any cabinets or AV racks. The goal here is to maximize coverage in the home – you can’t do that if you’re blocking the signal.
You can also try to perform a speed test. Bring your router to different locations in your home and see how the signal changes. You will be able to be more precise and strategic that way.
2. Change the Channel
Another step to maintaining a strong wireless network is through changing the channel. Your router can pick up other wireless devices such as cordless phones, Bluetooth speakers, microwave ovens or baby monitors.
That overload can cause interference, slowdowns, and unstable connections. If you switch your wireless network to a less busy channel you could increase connectivity.
Try using your Wi-Fi scanner when deciding on another network. Apple, Windows and Android systems all offer software you can download to identify strong networks in your vicinity.
3. Don’t Display Your SSID
Your router has a default setting that makes it easy for you to add devices to your SSID (Service Set Identifier). Meaning that visiting relatives and neighbors see your wireless network as an option.
If you hide the SSID, it won’t pop up in a scan for nearby networks. This will not affect your password and will preserve your signal strength.
4. Secure Your Network
Security should be at the top of your list when it comes to your wireless network. And the kind of security you have for your network is as important as having it in the first place.
WEP encryption has become a poor form of protection and can limit the speed of your wireless network. If possible, try to limit your router to only work with WPA2 encryption.
5. Reboot Your Router
If your wireless network is still unreliable, try rebooting your router. Shut down the device by switching off its power source. Then give it a few minutes before starting it back up again. The reboot should re-balance your Wi-Fi’s signal.
The Bottom Line on Your Wireless Network
Following any of these steps should allow you to maximize the strength of your wireless network. In most cases, you will notice big benefits. For more advice on wireless routers, try here.
Lagging and dropping connection is infuriating.
WiFi is an essential when we don’t have access to hard lines. This can be in personal use or business.
We’re annoyed if our videos buffer — it’s worse when you’re unable to operate the business due to the shoddy connection!
You’ve likely taken to online research when experiencing these dips in services.
Trying to see how to improve performance and router speeds. Stabilizing the network and continuing with your activities.
One earlier way was to overclock to improve router speeds. It’s still possible. Yet, most problems with speed come from the service and basic hardware configuration.
You can increase the speeds without having to get technical. Here is…
Easy Ways to Improve Router Speeds
If it’s speed you want… it’s speed you’ll get:
- Change the Channel – Modern routers default between channel 6 and 11. It may be likely your router is stuck in the lower ones or there is an interference with those around you. Consider using Wi-Fi Inspector, inSSIDER, or WifiInfoview to examine the channels and find the best for your router. When in doubt: change on over to 5GHz channels which provide higher speeds and less overlap in interference.
- Firmware/Driver Updates – Updates take a few minutes of your time but can increase the performance. These drivers and other firmware updates can be downloaded through router software or done so through downloads on the manufacturer updates.
- Placement – A super simple method of increasing router speed? Place it closer to your hardware. Block homes have heavy walls which reduce the WiFi signal. Manufactured homes with their metallic sidings will do the same. The distance matters, too. Try placing the router in a high position within closest proximity. Change positions, run speed tests, and discover the best spot.
- Repeaters/Extenders – Can’t get the most from the main router? No problem. Buy an extender or turn old older routers into an extender with a few tweaks. This will bridge the gap and keep those router speeds high.
- Reduce the Load – Another simple one. Try to reduce the number of devices that are connected to the WiFi. Go through and turn off the connections — then test the speeds. Else, remove them from permissions within the router settings for an added layer of permissions. Same goes with reducing bandwidth-hogging applications such as streaming services.
- Leeching – Maybe the WiFi is open? Maybe the neighbor is tapping in? Time to get rid of the leechers. It’s the process of ‘reducing the load’ above. Time to tell the locals to take a hike by cutting off their connection. It’s as easy as changing the permissions and password.
… And One More Major Tip
You’ve done the configuration. Placed the router in new areas. Configured the software and hardware. Great!
Want to know a quick tip? Call the provider.
You’d be surprised how quick they’ll jump to improving service when you mention a competitor. Or if you want to replace their hardware.
You can do these tweaks to improve performance. Why not begin with a bigger bump to router speeds with a simple phone call? Combine that with hardware knowledge and you’ll have blazing speeds!